Accesories

Anti-slip pads for BEM Tornado Compatibility: Suitable for model BEM Tornado (item no. 70200787) Scope of delivery: 4 pieces The anti-slip pads ensure that the device is stable and prevent it from slipping on smooth surfaces. They contribute to safe use and device stability. Please note: Unauthorized disassembly or repair of the device will void the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM 3-way tap - modern design meets 18/10 stainless steel quality The BEM 3-way kitchen tap combines modern design with high-quality stainless steel (18/10) and allows hot, cold and filtered water to be dispensed via a single tap - thanks to separate pipes without mixing. All water-bearing components are suitable for drinking water and KTW-tested. This BEM 3-way faucet is compatible with our under-sink filtration systems, such as Orion (Art. 600) or Akira (Art. 592), and can be used with them without any issues.​ Your benefits at a glance: 3 functions in one: hot water, cold water and filtered water from just one tap Separate outlets: no mixing of tap and filter water 18/10 stainless steel (AISI 304): robust, hygienic and corrosion-resistant Durable ceramic cartridge (KTW-tested) for hot and cold water Elegant design that blends harmoniously into any modern kitchen Technical data: Body material: Solid 18/10 stainless steel Spout: Precisely manufactured cast spout made of 18/10 stainless steel Handles: 18/10 stainless steel Cartridge (hot/cold): Ceramic, KTW-tested Cartridge (filtered water): Brass valve Hoses: 18/10 stainless steel, 60 cm long, 3/8" union nut Pipe for filtered water: 18/10 stainless steel Surface: Matt brushed stainless steel Total height: 350 mm Spout height: 320 mm Spout length: 270 mm Body diameter: 50 mm Handle length right: 100 mm Handle length left: 60 mm GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM LUNA set of 3 replacement filters (RO, PAC and CF) for BEM Luna water filter system 1. replacement filter for BEM Luna PAC water filter Features: Foldable combined polypropylene/cotton rod with activated carbon Removal of impurities such as sludge, rust, sand, suspended solids Removal of residual chlorine and absorption of unpleasant tastes and odors Replacement interval: Recommended filter cartridge replacement after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness)2. replacement filter for BEM Luna CF water filter Features: Composite carbon rod serves to improve the taste, enrichment with valuable minerals! Replacement interval: Recommended filter cartridge change after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness)3. replacement filter for BEM Luna RO water filter Features: Reverse osmosis filter element. Filtration fineness: 0.0001 micrometers Removal of deposits and heavy metals Replacement interval: Possible filter cartridge replacement after 12 to 24 months (depending on the quality of the tap water, e.g. water hardness)

BEM Robin replacement water jug : water jug | water filter | jug | carafe Replacement water jug for the water filtration system BEM: Model Robin suitable for: BEM Robin water filter Design: with lid Material carafe: high quality plastic Tritan - strong, scratch-resistant and resistant to high temperatures, does not contain harmful substances bisphenols capacity: 2,5 liter Color: transparent & black Dimensions: 24,5 x 13 cm (HxØ) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

CF replacement filter no. 3 for BEM Lina and BEM Ida CF water filter - Third cleaning stage CF Carbon post-filter – clean and pure taste after reverse osmosis. The CF filter is the final filtration stage in BEM IDA and LINA systems. It improves the taste, removes any remaining odors, and makes the water softer and more neutral after deep purification. The filter is made of compressed activated carbon and contains no added minerals. Main functions: Final purification after the RO membrane Removes remaining odors and off-tastes Improves overall water taste Ensures stable drinking water quality Installed in slot 3 (CF) in BEM Lina and BEM Ida filters If desired, the CF filter can be replaced with the CF filter with mineralizer​ (Art. No. 70200605), which enriches the water with 18 natural minerals such as calcium, magnesium, and potassium. The mineralization is gentle and balanced – just like in natural spring water. Details: Ø 6.8 x 29.2 cm Weight: 0.48 kg Replacement interval: Recommended filter cartridge replacement after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

CF+Mineralizer replacement filter no.3 for BEM Lina and BEM Ida water filter - third stage CF with mineralizer, SINGLE Mineralizing Filter – for a smooth taste and natural mineral balance. The CF filter is used in BEM IDA and LINA systems as the third stage of filtration. It not only purifies the water but also enriches it with 18 natural minerals, restoring its natural composition after reverse osmosis. Key functions: Mineralizes the water after deep filtration Restores the natural taste and structure of the water Enriches with essential minerals: Calcium, magnesium, potassium, sodium, zinc, strontium, and more Gentle and balanced mineralization: 30–60 ppm Details: Ø 6,8 x 29,2 cm Gewicht: 0,48 kg Replacement interval: Recommended filter cartridge replacement after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Check valve plastic straight connections 2x1/4". This check valve prevents water from flowing back to the unit or into lines where water should not flow back. It is usually installed directly after the membrane housing at the clean water connection. However, the check valve can also be used additionally in the waste water area. Features: 2 x 1/4"- 1/4" inch pipe PE pipe straight check valve quick coupling for water hoses. Technical data: 1/4" x 1/4" check valve Backflow preventer / Backflow stop / Check valve straight, 1/4" x 1/4" , per hose connection incl. 2 safety clips left: 1/4" (6,35 mm) hose connection right: 1/4" (6,35 mm) hose connection Dimensions: 54 x 15 (L x W in mm) Item weight: 8g GPSR-Informationen Verantwortliche PersonFirma: BEM GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Cold water pump for BEM LINA / IDA Compatibility: Suitable for models BEM LINA (art. no. 597) and BEM IDA (art. no. 596) The cold water pump circulates the cold water in the appliance. It ensures an even flow of water and supports the stable and efficient operation of the system. Note: Unauthorized disassembly or repair of the appliance will invalidate the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Connection block for exchangeable cartridges for BEM LINA / IDA Compatibility: Suitable for models BEM LINA (art. no. 597) and BEM IDA (art. no. 596) The connection block is used to securely connect the exchangeable cartridges to the appliance. It ensures a stable fit, reliable sealing and perfect water circulation in the system. Note: Unauthorized disassembly or repair of the appliance voids the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

QuickConnect connector/connector bent 3/8" x 1/4" inch for drinking water hoses water filter systems. Here you will receive a QuickConnect connector 3/8" x 1/4" inch hose connector. The QuickConnect connector 3/8" x 1/4" inch Quick hose connector with 90° bend often find your use in household osmosis systems, reverse osmosis system, side by side refrigerators, drinking water dispensers, water dispensers, countertop filters, under-sink filters, water filters, filtration systems, in the beverage, and water treatment industry. Features: 4 metal anchors as well as a seal are integrated in each connector, which guarantee an absolutely secure hold. if you want to disconnect the hose from the connector, you only need to release the locking clip and press the white locking ring in evenly and the hose can be pulled out of the connector. Technical data: Working pressure at 20°C up to 10bar Working pressure at 65°C up to 7bar 1 x 3/8" inch spigot / push-in connector 1 x 1/4" inch hose connector 1 x 90° elbow 1 x safety clip GPSR-Informationen Verantwortliche PersonFirma: BEM GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Contact surface of the water jug for BEM Tornado Compatibility: Suitable for model BEM Tornado (art. no. 70200787) The contact surface of the water jug serves as a connection point between the water tank and the appliance. It ensures a secure connection and a reliable power supply during operation. Note: Unauthorized disassembly or repair of the appliance voids the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Control panel for BEM Tornado Compatibility: Suitable for model BEM Tornado (item no. 70200787) The control panel is used to control the functions of the device. It enables simple and intuitive operation as well as access to all basic settings. Note: Unauthorized disassembly or repair of the device voids the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

BEM Aqua Digital Water Tester A1 TDS & EC with signal effect for drinking water quality control. A1 TDS & EC portable meter is a professional instrument with multi-function, which can be used to test water TDS (the weight of total dissolved solid of water, unit is mg / l or ppm), conductivity (the ability of line current in digits, unit is us / cm) and temperature. It has high performance, pen design, fast numerical stability and accurate result. Features: Hold function: the instrument will hold the measurement result when you press the "HOLD" button. After locking, press the "SHIFT" key to switch to the result of another mode. Automatic power off function: the instrument will turn off automatically to save battery power if you do not press any key within 5 minutes Automatic temperature compensation: the device has an automatic temperature compensation function Mode switching: when you press the "SHIFT" key, the instrument automatically switches between the following four display modes: *the device has a memory function - the boot mode is the mode in which it was last shut down Maintenance: Keep the electrode clean. Always close the electrode protection cap. Please remove the batteries if you do not use the instrument for a long time. Operation: 1. remove the electrode protection cap before use. Press the ON/OFF button and immerse the meter in the solution (the solution should not go beyond the immersion line). 3. 3. after the numerical display is constant, press the "HOLD" button and remove the meter from the solution to check the result 4.Wipe the electrode after use, turn off the meter and replace the protective cap Technical data: Accuracy: ± 2% Weight: 55 g Size: 154 x 30 x 14 mm Notice: 1.Avoid heat and direct sunlight. 2.Please use standard buffer solution for calibration. Incorrect calibration would cause result errors, thus affecting the accuracy of measurement or causing the instrument not to work. The instrument is not waterproof. Do not throw it into the solution and do not place the solution above the immersion line to prevent the PCB from shooting out. Warranty: The warranty period for the product begins on the day of purchase. The following situations are not covered by the warranty. Damage caused by misuse (battery leakage, water penetration into the circuit boards, etc.). GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Drip tray for BEM LINA / IDA - practical accessory and spare part for the BEM LINA and BEM IDA table water filters The drip tray serves as a stable surface for glasses, cups or bottles and reliably collects excess water. It consists of a two-part design: removable grid and drip tray, which are easy to clean. Thanks to its non-slip feet, the drip tray stays securely in place and keeps the appliance tidy and clean. Ideal for everyday use and indispensable for convenient operation of your water filter. Details: The white lower part is made of ABS plastic, the upper part with the water container has an electroplated coating Dimensions (LxWxH): 23 x 8.6 x 4.5 cm Weight: 150 g Fits our table water filters BEM LINA (item no. 597) and BEM IDA (item no. 596) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Angle connector for one hose, bent 3/8" x 1/4" inch. High quality elbow connector with proven QuickConnect plug-in connection. This technology was specially developed for the beverage industry. Sturdy high-quality elbow connector coupling for connecting 3/8" inch diameter (approx. 9.5 mm) and 1/4" inch diameter (approx. 6.35mm) hoses to water filters, or hose to water filter housings. Features: Simply plug the hose into the designated opening - done. There are 4 metal anchors and a gasket integrated into each connector. If you want to release the hose from the connection, you only need to press in the white locking ring evenly and the hose can be pulled out of the plug-in connection. Technical data: Quick connector bent 3/8" x 1/4" inch for drinking water hoses, water filter systems. Quick connector, elbow connector for hose, bent 3/8" x 1/4" inch (3/8" hose x 1/4" inch hose). GPSR-Informationen Verantwortliche PersonFirma: BEM GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Hose T-connector coupling 3 x 1/4". The straight connectors were manufactured for the beverage industry and do not release any substances to food and are food safe, in addition they have NSF certification and are therefore also installed in refrigerators and other systems due to their high load capacity / safety. Features: 4 metal anchors as well as an internal seal are integrated in each hose plug-in connection, which guarantee an absolutely secure hold of the hose in the coupling Quick connector, T-coupling ( 3 x 1/4" hose ) T-piece connector coupling a high quality plastic accessory for the installation of replacement filters, filter housings and reverse osmosis water filter systems with proven Quick & Easy fitting closure technology Assembly and use of the water filter - accessories: a 1/4" water hose is simply inserted into the opening of the connector coupling and the blue safety clip, which is previously removed from the angle - coupling, can be put back on again after securing by the blue clip the hose connection is secured and the assembly is completed if you want to remove the hose from the connection, you only need to loosen the blue safety clip and press in the white safety ring evenly, then the hose can be pulled out of the connector coupling Technical data: T-connector with 3 x quick couplings for hoses ( 1/4 inch x 1/4" x 1/4" ). T-connector Symmetrical 3 x quick coupling 3 x 1/4" for water hoses filter systems T-piece hose connector coupling fitting 1/4 inch x 1/4" x 1/4" hose connection (6mm) as connector / connector osmosis system water filter filter housing reverse osmosis system refrigerator filter GPSR-Informationen Verantwortliche PersonFirma: BEM GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Hydrogen module for BEM Tornado Diameter: 7.6 cm Compatibility: Suitable for model BEM Tornado (item no. 70200787) The hydrogen generator plate is used to replace worn or damaged components. It ensures stable operation of the system and efficient hydrogen generation. Note: Unauthorized disassembly or repair of the device will void the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Inline cartridge mineralization filter 10 x 2" inch / quick coupling 1/4" Post-filter for mineralization of drinking water and pH value regulation 2" inch / quick coupling 1/4". The mineral inline mineralization cartridge is filled with high-quality minerals: Ca 19.2 mg/l Mg 12.6 mg/l Na 3.8 mg/l K 4.7 mg/l CJ 19.2 mg/l HCO3 12.6 mg/l SO4 3.8 mg/l Cl 4.7 mg/l With this cartridge as a post-filter, elements can be added back to the water in a controlled manner which were previously removed by the reverse osmosis process. Vital minerals such as iron, zinc, magnesium, selenium as well as calcium, magnesium, selenium and calcium are added to the osmosis water via bioceramic balls, magnesium, selenium as well as calcium, sodium or potassium and other trace elements are dissolved in the osmosis water. The ORP value (redox value) is reduced to up to -100mV and the pH value is increased by up to increased by up to 2 pH units. This mineralization improves the taste of the water of the water is improved and the pH value is stabilized. GPSR-Informationen Verantwortliche PersonFirma: BEM GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

LED board for BEM Tornado Compatibility: Suitable for model BEM Tornado (item no. 70200787) The LED board serves as a replacement part for the device's lighting system. It ensures stable and even illumination during operation. Note: Unauthorized disassembly or repair of the device will void the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Left display side for BEM LINA / IDA Compatibility: Suitable for models BEM LINA (art. no. 597) and BEM IDA (art. no. 596) The left display side is the left panel in the display area of the device. It protects the electronic unit and contributes to the visual structure and functionality of the display. Note: Independent disassembly or repair of the device will invalidate the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Main board for BEM Tornado Compatibility: Suitable for model BEM Tornado (art. no. 70200787) The main board is the central control element of the device. It coordinates all electronic functions and ensures stable and reliable operation of the system. Note: Unauthorized disassembly or repair of the device voids the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Main board with heating element for BEM LINA / IDA / LUNA Compatibility: Suitable for models BEM LINA/IDA (art. no. 597/596) and BEM LUNA (art. no. 599) The main circuit board with integrated heating element is the central control module of the appliance. It regulates the heating function and coordinates all electronic processes to ensure stable and efficient operation. Note: Unauthorized disassembly or repair of the appliance voids the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Main pump for BEM LINA / IDA Compatibility: Suitable for models BEM LINA (art. no. 597) and BEM IDA (art. no. 596) The main pump (boost pump) is a central component of the appliance. It provides the necessary water pressure in the system and ensures even circulation as well as stable and efficient performance during operation. Technical data Voltage: 24 V Operating pressure: 70 PSI Flow rate: ≥ 1000 ml/min Operating current: ≤ 1.5 A Operating temperature: 5 °C - 45 °C Note: Independent disassembly or repair of the device voids the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Main pump for BEM LUNA Compatibility: Suitable for model BEM LUNA (item no. 599) The main pump (boost pump) is a central component of the appliance and ensures the required water pressure in the system. It ensures stable circulation and optimum performance during operation. Technical data Voltage: 24 V Operating pressure: 70 PSI Flow rate: ≥ 550 ml/min Operating temperature: 5 °C - 45 °C Operating current: 1.0 A - 1.3 A Note: Independent disassembly or repair of the device will invalidate the warranty. Please contact the manufacturer if repair or advice is required. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de